Pellet Moisture Control

Skip to content

Products / Pellet Moisture Control

PMC-2 · BEFORE & AFTER DRYER

Know pellet moisture,
on both sides of the dryer.

Two complementary measurement principles answer different questions at different process points.

Discuss your dryer application ↗
FeedPellet bed
NIRFast surface readings
DryerProcess action
MicrowaveBulk moisture
ProductCooler / stockpile

BEFORE THE DRYER

Fast feed-side insight.

NIR reflectance provides fast surface-moisture trends for dryer feed control. Consider dust, steam, lens cleaning and material reflectivity.

AFTER THE DRYER

See moisture inside the bed.

Microwave sensing measures bulk moisture. Microwave measurement offers resistance to dust and steam, with slower response, calibration and specialized installation tradeoffs.

OPTIONAL AUTOMATION PACKAGE

From two readings to a closed loop.

SensorsMoisture + process inputs
PLC + edgeI/O and processing
SCADA / historianTrends, alarms, records
Plant controlsProject-specific outputs

Fuel, airflow, speed and related dryer outputs can be included in the proposed control architecture. Scope, interfaces and plant control responsibilities are confirmed during engineering.

Reference dual-zone configuration

Standard/reference configuration. Final values confirmed per project during the site survey.
Before-dryer sensorNIR reflectance moisture analyzer; surface measurement
After-dryer sensorMicrowave moisture analyzer; bulk/volumetric measurement
Mounting height400–800 mm above belt
Optional temperature sensorIR pellet temperature sensor after dryer
Optional PLCS7-1500 class industrial PLC or equivalent
Optional edge controllerIPC for real-time moisture and process data
Optional SCADA / historianRedundant server; data, alarms, reports and KPIs
Optional operator HMIWinCC / Ignition-class interface
Industrial networkProfinet / Ethernet-IP, according to scope
Data protocolOPC UA / Modbus TCP, according to scope
Optional plant integrationDCS/PLC, APC, MES/ERP and CMMS
Possible control outputsFuel valve, burner management, airflow damper, dryer speed, exhaust fan, recycle damper, alarms/interlocks; confirmed per scope

Typical dual-zone configuration. Final values confirmed during site survey; process outcomes depend on operating conditions.

Questions about moisture measurement

Why use different sensors before and after the dryer?

NIR provides fast surface readings before drying; microwave measurement penetrates the bed to assess bulk moisture after drying.

Is the automation layer included in every project?

The control package is optional. Sensor installation, control outputs and plant-system integration are defined for the agreed project scope.

FROM DATA TO A PLANT DECISION

What the measurement makes possible.

Process benefit

Compare feed-side surface trends with final bulk moisture, then connect readings to agreed dryer control outputs.

Operational outcome

Support product consistency and more informed dryer operation. Energy and quality outcomes depend on the process and engineered control scope.

APPLICATION ENGINEERING

Discuss your installation.

Share your process details to help us assess the measurement point and configuration.

This field is required.
This field is required.
This field is required.
This field is required.

FROM MEASUREMENT TO A PRACTICAL DECISION

Discuss your application
with an engineer.

Tell us about your process ↗